Solution Description

CZPT Keyless Locking Assembly KLD-2
Medium torque, self-centering, little cross area, machining tolerance shaft H8, hub H8 Socket head locking screw DIN912-12.nine
Self-centering with superb concentricity the tiny outer diameter is space-saving and ideal for modest wheel diameters the spacer ring between the outer flange and the hub maintains the fitting place in the axial path to allow precise positioning with no a shaft collar the press-off threads in the outer flanges are used for dismantling.
 
KLD-2 Interchange with Z11,BIKON 8000,BEA BK80,BONFIX CCE1000,Problem 02,Chiaravalli RCK80,CONEX  B,7110 ECOLOC, Fenlock FLK110,GERWAH PSV2571.1,ITALBLOCK CN55,KTR250,KINLOK LOK10,KBS80,MAV 5061,POGGI CAL-B,RFN7110,Ringspann CZPT a hundred and ten,Ringblok 1100,SIT 3,SATI KLCC,TOLLOK TLK110,Tsubaki TF,V-Blok VB800B,Walther Flender MLC3000,Fenner CZPT B-Loc B800,LoveJoy SLD1900,SKF FX20,OKBS80,DRIVELOCK80
 
Ubet Locking CZPT ments KLD-3
Lower torque, Medium surface pressure, Taper rings only, Low axial and radial proportions
This clamping set is self-centering with superb concentricity. The very little outer diameter is place-conserving and suitable for small wheel diameters. The spacer ring in between the outer flange and the hub maintains the fitting position in the axial direction to empower specific positioning without having a shaft collar. The push-off threads in the outer flanges are utilized for dismantling.
 
KLD-3 Interchange with Z1,BIKON 5000,BEA BK50,BONFIX CCE3000,Problem 03 Chiaravalli RCK50,CONEX  C,Fenlock FLK300,ITALBLOCK CN31,KRT150,KINLOK LOK80,KBS50,KANA 300,MAV 3003,POGGI CAL-C,RFN8006,Ringspann CZPT 300,Ringblok 1060,SIT 2,SATI KLNN,TOLLOK TLK300,Tsubaki EL, ,Walther Flender MLC 2000,Fenner CZPT B-Loc B112,LoveJoy SLD350,SKF FX30,OKBS50,DRIVELOCK50
 
Ubet CZPT Locking Device KLD-four
High torque, self-centering, medium floor force, machining tolerance shaft H8, hub H8 socket head Locking screw DIN912-12.nine
 
KLD-4 Interchange with Z3,BIKON 7000A,BEA BK70,BONFIX CCE4000,Problem 04,Chiaravalli RCK70,CONEX  D,7004 ECOLOC, Fenlock FLK130,GERWAH PSV2007,ITALBLOCK CN54/N,KTR200,KINLOK LOK20A,KBS70,MAV 6901,POGGI CAL-D,RFN7013.,Ringspann CZPT 130,Ringblok 1300.1,SIT 5A,SATI KLDA,TOLLOK TLK130,V-Blok VK700,SKF FX40,OKBS70,DRIVELOCK70
 
Ubet Shaft Hub Connection KLD-five
Medium torque, decreased duration, medium self-centering, CZPT surface area strain, machining tolerance shaft H8, hub H8 socket head Locking screw DIN912-twelve.nine
Appropriate for slender, disk-formed wheel hubs. Self-centering and self-locking in the clamping condition.
 
KLD-5 Interchange with Z3B,BIKON 1003,BEA BK13,BONFIX CCE4100,Problem 05,Chiaravalli RCK13,CONEX  DS,7003 ECOLOC, Fenlock FLK132,GERWAH PSV2006,KTR203,KBS13,KANA 201,MAV 1062,POGGI CAL-DS,RFN7013., Ringspann CZPT 132,Ringblok 1710,SIT 6,SATI KLAA,TOLLOK TLK132,TAS3003,       V-Blok VK160,Walther Flender MLC 5006,LoveJoy SLD1750,SKF FX41, OKBS13, DRIVELOCK13.
 
Ubet Shaft Locking Gadget KLD-six
Medium torque, self-centering, Lower surface pressure, No axial hub motion, machining tolerance shaft H8, hub H8 socket head Locking screw DIN912-twelve.nine
 
KLD-6 Interchange with Z13,BIKON 7000B,BEA BK71,BONFIX CCE4500,Challenge 06,Chiaravalli RCK71,CONEX  E,7007 ECOLOC, Fenlock FLK131,GERWAH PSV2007.3,ITALBLOCK CN54/S,KTR201,KINLOK LOK20B,KBS71,MAV 6902,POGGI CAL-E,RFN7013.1,Ringspann CZPT 131,Ringblok 1300.2,SIT 5B,SATI KLDB,TOLLOK TLK131,Tsubaki KE,V-Blok VK700.1,Walther Flender MLC5000B,SKF FX50,OKBS71,DRIVELOCK71
 
Ubet Clamping CZPT Lock KLD-7
Medium torque, reduced length, CZPT floor stress, No axial hub movement, machining tolerance shaft H8, hub H8 socket head Locking screw DIN912-12.9 Simultaneous Relationship of Chain CZPT
 
KLD-7 Interchange with Z8,BIKON 1006,BEA BK16,BONFIX CCE4600,Challenge 07,Chiaravalli RCK16,CONEX  ES,7006 ECOLOC,Fenlock FLK133,GERWAH PSV2006.3,ITALBLOCK CN9/4,KTR206,KBS16,KANA 201,MAV 1061,POGGI CAL-ES,RFN7013.1,Ringspann CZPT 133,Ringblok 1720,SATI KLAB,TOLLOK TLK133,Tsubaki AE,TAS3006,V-Blok VK130,Walther Flender MLC 5007,LoveJoy SLD1750,SKF FX51,OKBS16,DRIVELOCK16
 
Ubet Shrink Disc KLD-14
Substantial torque, No axial hub motion, CZPT velocity application, chosen answer for coupling hub and hollow shaft gearbox, DIN931-ten.9 screw Wise-Lock Shrink Disc, Narrow Hub Relationship for sprockets, link hollow and sound shafts frictionally and backlash-cost-free.
 
KLD-fourteen Interchange with Z7B,BEA BK19,BONFIX CCE8000,Problem 14,Chiaravalli RCK19,CONEX  SD, Fenlock FLK603, ,KTR603,KBS19,MAV 2008,RFN4071,Ringspann CZPT 603,Ringblok 2200,SATI KLDD,TOLLOK TLK603, Tsubaki SL, ,Walther Flender MLC 9050,Fenner CZPT B-Loc SD10,LoveJoy SLD900,SKF FX190,OKBS19,DRIVELOCK19
 
Ubet Locking Assembly KLD-15
Large torque, self-centering, Reduced-medium floor stress, machining tolerance shaft H8, hub H8 socket head Locking screw DIN912-twelve.9
 
KLD-fifteen Interchange with BEA BK15, Problem fifteen,Chiaravalli RCK15,CONEX  EP, Fenlock FLK134,KBS15 ,MAV 3061,Ringspann CZPT 134,SATI KLBB,TOLLOK TLK134, ,SKF FX52,DRIVELOCK15
 
 
Ubet Locking Bushes KLD-sixteen
Medium torque, Lowered duration, Medium self-centering, CZPT surface force, machining tolerance shaft H8, hub H8 socket head Locking screw DIN912-twelve.nine
 
KLD-16 Interchange with BONFIX CCE4900,Challenge 16,CONEX  L,KTR225,KBS52,SATI KLHH,,SKF FX120
 
 
Ubet Ball CZPT Adapter Sleeve KLD-17
Low torque, Brief Size, Not self-centering, Reduced area force, machining tolerance shaft H8, hub H8
 
KLD-seventeen Interchange with BEA BK25, Obstacle 17, KBS51, SATI KLFC,,SKF FX80
 
Ubet CZPT Adapter Sleeve  KLD-seventeen.one
Minimal-medium torque, self-centering, minimal area pressure, machining tolerance shaft H8, hub H8
 
KLD-seventeen.1 Interchange with Z19B, BEA BK26,Challenge 21,Chiaravalli RCK55, Fenlock FLK250,KTR125,KBS55, POGGI CAL-L,Ringspann CZPT 250,Ringblok 1500, SATI KLFF,TOLLOK TLK250
 
Ubet Shaft Clamping Collar KLD-eighteen
Minimal-medium torque, Limited Size, self-centering, reduced area pressure, machining tolerance shaft H8, hub H8, socket head Locking screw DIN912-twelve.9
This clamping established is self-centering and suited for really small shaft diameters.     It transfers common to big torques
 
KLD-seventeen.1 Interchange with BEA BK61,Chiaravalli RCK61,7002 ECOLOC ,GERWAH PSV2061,KTR105,KBS61,MAV 7903,SATI KLSS, Walther Flender MLC 5050,SKF FX350,OKBS61,DRIVELOCK61
 
Ubet Clamping System KLD-19
very high torque, self-centering, medium area force, no axial hub motion, machining tolerance shaft H8, hub H8,  socket head Locking screw DIN912-12.9
This clamping set is self-centering with excellent concentricity. The incredibly little outer diameter is room-preserving and suited for tiny wheel diameters. The spacer ring among the outer flange and the hub maintains the fitting situation in the axial route to empower precise positioning with out a shaft collar.
 
KLD-19 Interchange with Z12A,BIKON 1012,BEA BK11,BONFIX CCE9500,Problem 19,Chiaravalli RCK11,CONEX  F,7005 ECOLOC,Fenlock FLK400,GERWAH PSV2005,ITALBLOCK CN911,KTR400,KINLOK LOK40,KBS11,MAV 4061,POGGI CAL-F,RFN7015,Ringspann CZPT four hundred,Ringblok 1800,SIT 4,SATI KLEE,TOLLOK TLK400,Tsubaki Ad,TAS3012,V-Blok VK112,Walther Flender MLC 4000/MLC 7000,Fenner CZPT B-Loc B112,LoveJoy SLD2600,SKF FX60,OKBS11,DRIVELOCK11
 
Ubet Clamping Unit  KLD-33 interchange with Z4, RFN7014
 
Ubet Locking System KLD-34 interchange with  Z5,BIKON 1015./1015.1, 7009 ECOLOC,Fenlock ,GERWAH PSV2009, KTR401,MAV 1008,RFN7015.,Ringspann CZPT 401,Ringblok 1810,TOLLOK TLK451,TAS3015./3015.1,

Keyless Locking Units are also get in touch with as below 
1.     Welle-Nabe-Verbindungen
two.     Wellenspannsaetze,
3.     Spannsaetze, 
4.     Taper Spannbuchsen,
five.     Taper Lock, 
6.     Keyless Locking Gadget,
7.     Keyless Locking  Assembly,
eight.     Keyless Shaft Locking Unit,
9.     Keyless Shaft Hub Locking Unit,
ten.  Keyless Bushings,
eleven.  Keyless Shaft Hub Link,
12.  Clamping Sleeve,
thirteen.  Clamping CZPT ment,
fourteen.  Clamping Collar,
15.  Clamping Bush,
sixteen.  Clamping Units,
seventeen.  Clamping Set,
eighteen.  Clamping CZPT Lock,
19.  Cone Clamping CZPT ment,
twenty.  Shaft Clamping,
21.  Shaft Repairing,
22.  Shaft Correcting Cone Clamping CZPT ment, 
23.  Conical clamping rings, 
24.  Shaft Lock Clamping CZPT ment,
25.  Shaft Clamping CZPT ment,
26.  Shaft Clamping Collar,
27.  Shaft Locking System,
28.  Shaft Hub Link,
29.  Shaft Hub Locking Device,
30.  Shaft Hub Locking Assembly,
31.  Shaft Lock,
32.  Silted Clamping CZPT ment,
33.  Shaftlock Clamping CZPT ment,
34.  Locking Assembly,
35.  Locking Bushes,
36.  Locking Rings,
37.  Rigid Shaft CZPT ,
38.  Rigid Shaft Coupler,
39.  Rigid Ring Block,
forty.  Ring Shaft Lock, 
41.  Ringblock Locking Assemblies,
42.  Gear Wheel Connection,
43.  Zinc Plated Locking Units, 
44.  Nickel Plated Locking Assembly,
45.  Mechanical Locking Device, 
46.  Mechanical shaft lock,
forty seven.  Schrumpfscheibe,
forty eight.   External Locking Assembly,
49.  Narrow Hub Connection for CZPT s,
fifty.  Shrink Disc, 
51.  Brake Disc, 
fifty two.  Shrink Disk,
53.  External Locking Assembly CZPT Obligation, 
54.  Shrink Discs Standard Obligation, 
55.  Shrink Disks CZPT Responsibility, 
56.  Smart-Lock Schrumpfscheibe, 
fifty seven.  Smart-Lock Shrink Disc, 
fifty eight.  Bearing Adapter Sleeve, 
fifty nine.  Lock Nut,
sixty.  POWER NUT, 
61.  POWER Hyperlink, 
sixty two.  Shaft Self-Lock Ring Nut, 
sixty three.  Nickel Plated Locking Gadgets,  
64.  Zinc Plated Locking devices, 
65.  Stainless Metal Locking Gadgets.

Ubet CZPT ry is also competetive on these CZPT transmission parts.

Clamp CZPT lock, CZPT Lock, Locking Assembly, Locking unit is a keyless shaft-hub locking devices for connecting hubs and shaft with large torque transmission, are linker used amongst shafts and pulley, which can replace the one important and spline.
They can transmit torque through a established of tightening screw with substantial power, which can make the essential clamping power in between the inner rings and shaft, also among the outer ring and hub. It’s straightforward assmebling and diassembling.
They have a excellent interchangeablity. The screw are with large toughness.
Power lock have several product
We create by CNC machine
Their primary materials is superior metal.
Following machining, they will have smooth and beautiful surface, have CZPT daily life time and high energy.

one. CZPT regular CZPT Lock
two. Most well-liked on CZPT pean market
3. Metal 42CrMo4 / 4140 C45E / 1045
We are a leading maker of CZPT Lock in CZPT . Far more than sixty five% of CZPT merchandise are exported to CZPT CZPT pe and twenty% to North CZPT ica. We promise outstanding top quality item with competitive cost in CZPT .
Our CZPT Lock are interchangeable to:
Ringfeder, Tollok, Chiaravalli, Sati, Challenge, Bonfix, Compomac, V-Blok, Ringblok, Kana, KTR
GB STHangZhouRD: Z1, Z2, Z3, Z3 CZPT ER, Z4, Z5, Z6, Z7B, Z8, Z11, Z12A, Z13, Z14, Z19A, Z19B
RINGFEDER GERMANY STHangZhouRD: RFN4071, RFN7012, RFN7013, RFN7110, RFN8006
TSUBAKI JAPAN STHangZhouRD: AS, TF, EL, SL, Advertisement
CHIARAVALLI CZPT STHangZhouRD: RCK11, RCK13, RCK15, RCK16, RCK19, RCK40, RCK45, RCK50, RCK55, RCK70, RCK71, RCK80, RCK95
TOLLOK CZPT STHangZhouRD: TLK110, TLK130, TLK131, TLK132, TLK133, TLK134, TLK200, TLK300, TLK400, TLK603
RINGSPANN GERMANY STHangZhouRD: CZPT one hundred thirty, CZPT 132, CZPT 133, CZPT two hundred
BIKON GERMANY STHangZhouRD: 1003, 1006, 1012, 4000, 5000, 7000A, 7000B, 8000
BONFIX STHangZhouRD: CCE1000, CCE2000, CCE3000, CCE4000, CCE4100, CCE4500, CCE4600, CCE4900, CCE8000, CCE9500
SATI STHangZhouRD: KLGG, KLCC, KLNN, KLDA, KLAA, KLDB, KLAB, KLPP, KLBB, KLHH, KLEE, KLFF, KLMM
COMPOMAC STHangZhouRD: A, B, C, D, ES/DS, EP, SD, F
VBLOK STHangZhouRD: VK400, VK800B, VK700, VK160, VK700.1, VK130, VK112
RINGBLOK STHangZhouRD: 1060, 1100, 1120, 1710, 1720, 1800
KANA STHangZhouRD: two hundred, 201, three hundred
KTR STHangZhouRD: KTR100, KTR150, KTR200, KTR201, KTR203, KTR206, KTR225, KTR250, KTR400, KTR603
Function
one. Effortless to set up and dismantle.
two. CZPT degree of flexibility
three. CZPT life time and substantial effective transmitting
four. Lower notching influence
five. CZPT of the expensive products beneath more than load managing.
6. In compliance with top quality prerequisite of designed coutries.
7. CZPT substantial high quality with most affordable price tag.
Clamp CZPT lock, keyless locking unit, locking device, shaft locking assemblies, keyless shaft locking system, keyless shaft-hub locking unit, lock system

 

china  wholesaler Keyless Locking Assembly Kld-2 Z1, Z2, Z3, Z3, Z4, Z5, Z6, Z7b, Z8, Z11, Z12A, Z13, Z14, Z19A, Z19b Electricity Lock makers